(click the photos for larger)
Contains three standard hex
wrenches -or- three deluxe hex drivers for screws found on the above models.
You will receive:
.050" for the front breech
1/16" for the trigger cover assembly (and most trigger shoes, too)
5/64" for the barrel set screws (at the breech and the barrel band)
Also available is a #2 Square
Bit Driver for the grip frame to main tube screws.
A flat head screwdriver works
on these screws, but a #2 square bit makes the job a whole lot easier.
Only the tools are included.
Any Crosman parts shown in the photos are NOT included.